<p>Mantap juragan Christ ni... Baik, dan memberikan solusi...
The DJI MC for Phantom 2 Vision houses the quad-copter's flight computer and provides connection ports for auxiliary hardware associated with the fight control system, such as the receiver, GPS, gyro sensor, IMU, and more.
The Flame Wheel F550 is a multi-rotor flying platform designed for amateur aerial photography, first person view applications, and general flying entertainment. When combined with the NAZA or Wookong-M autopilot systems, hovering and cruising are almost effortless, while rolling and other advanced maneuvers can be more easily performed.
Protect your propellers from damage during collisions. Tough and highly reliable, this set includes four pieces of Phantom 4 Propeller Guards. Fully compatible with the Phantom 4.
The Phantom 4 Battery Charging Hub is designed for use with the Phantom 4 Intelligent Flight Battery. When used with the Phantom 4 Battery Charger, it can charge up to three Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low.
DJI Phantom 4 Pro 5870mAh High Capacity Intelligent Flight Battery.
These are 2 Pieces of Tarot X8001 Replacement Landing Gear Set
Crafted out of CNC machined 6061T6 alumiium and carbon shaft, the GPS pedestal stand keeps the module high and away from possible sources of interference and a clean signal. The base is mounted using the included M2.5x5mm cap head screws to secure the base to the frame. The stem has a key way to keep your GPS module pointing in the right direction.
Tarot Six Axis Distribution Board with Cover, a tidy multi-rotor power distribution board, suitable for six rotors. Simply solder your power and esc wires directly to the PCB and fit back into the neat case.
This is a replacement DJI S1000 Battery Holder. Package includes a battery plate, an 8" length of hook/loop tape and two battery straps.
The kit is designed to convert the Tarot FY650 / FY680-Pro / FY690S multirotor frames without drilling new holes*. With a little DIY, the landing gear could easily be made to fit other 450-700 class multirotors.
This is a power distribution hub specially designed for multirotor use where dedicated, separate power supply to the flight control and auxilliary systems is desirable.